Raymarine forum / Raymarine Forums / Instruments v / [CA] sea talk hs and sea talk ng

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] sea talk hs and sea talk ng
03-28-18, 03:28 PM (This post was last modified: 03-28-18 03:31 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] sea talk hs and sea talk ng
Welcome to the Raymarine Forum Robert,

It is recommended that you verify that the i50 Tridata has been configured a Repeater of Depth, Speed, and Temperature data rather than as a Master of these data items. You may find detailed information on this subject within Section 8.4 Datamaster of the i50 Instruments Installation and Operation Instructions. One additional note: rather than powering the SeaTalkng / NMEA 2000 backbone via the ACU-200, it is considered to be a best installation practice to power a SeaTalkng / NMEA 2000 backbone via a spur cable which has been interfaced to a dedicated switched 12VDC power circuit.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] sea talk hs and sea talk ng - Chuck - Raymarine - Moderator - 03-28-18 03:28 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication