The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Product Selection Assistance v / New setup

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New setup
04-22-16, 11:45 AM
Post: #1
robodad Offline
Junior Member
**
 		Posts: 3
Joined: Apr 2016
Reputation: 0
New setup
I have a 26' Olympic with a 12 degree hull and I want to install a new fish finder so I decided on the A128 E70237-NAG MFD. I normally fish deep salt water from 10' to 1000' for bottom fish and also tuna and salmon so I need to know which sounder module and transducer will work the best. I want to use the chirp and down vision for image clarity and FF capabilities and also the clearpulse. I had the CP470 module and A80010 B265LH D/T Through Hull Low-High Transducer in mind but there are so many choices I just get swallowed up.

Note: I have a Raymarine autopilot 5000+ that if possible I'd like to connect as well or replace the head unit so I can !!

I really appreciate any input from you guys !!

Allen...
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
New setup - robodad - 04-22-16 11:45 AM
RE: New setup - robodad - 04-24-16, 10:12 AM
RE: New setup - robodad - 04-26-16, 04:06 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication