Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Replace C120 Classic with E120 Classic?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Replace C120 Classic with E120 Classic?
04-03-18, 07:57 AM
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Replace C120 Classic with E120 Classic?
willyritch,

Q. Could I also use a DSM30, DSM300, or CP300 sounder module?
A. Should the transducer be a 600W transducer, then any of the three sounder modules would be an alternative to the CP370 (strongly recommended). Should the transducer a 1kW transducer, then the DSM300 and CP300 would be an alternative to the CP370 (again, strongly recommended).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Replace C120 Classic with E120 Classic? - Chuck - Raymarine - Moderator - 04-03-18 07:57 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication