[CA] sidescan only reads port side with sterndrive down

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] sidescan only reads port side with sterndrive down

04-04-18, 11:37 AM (This post was last modified: 04-04-18 01:35 PM by Chuck - Raymarine - Moderator.)

Post: #3

xfib

Junior Member

Posts: 1
Joined: Feb 2016
Reputation: 0

RE: [CA] sidescan only reads port side with sterndrive down

Chuck, I have the same issue and a possible solution would be to use two transducer mounts, one on each side of the outdrive, I don't know if the cable split would be long enough? I did contact Raymarine to get a part number for an additional mount but was told that part wasn't sold separately. Any thoughts?

« Next Oldest | Next Newest »

Messages In This Thread

[CA] sidescan only reads port side with sterndrive down - snakedriver - 03-28-18, 09:15 PM

RE: [CA] sidescan only reads port side with sterndrive down - Chuck - Raymarine - Moderator - 03-29-18, 10:58 AM

RE: [CA] sidescan only reads port side with sterndrive down - xfib - 04-04-18 11:37 AM

RE: [CA] sidescan only reads port side with sterndrive down - Chuck - Raymarine - Moderator - 04-04-18, 01:50 PM

User(s) browsing this thread: 4 Guest(s)