Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Electronics Upgrade
04-05-18, 11:37 AM (This post was last modified: 04-05-18 12:35 PM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [CA] Electronics Upgrade
Joe,

Q1. I will use your first suggestion for the camera connection.
A1. Noted.

Q2. However, my diagram shows the 2nd NET connection on the MFD being used for the Radar data cable. Should I connect the Radar to the backbone (as a spur) instead?
A2. Negative. The Axiom Pro S 12 MFD features a pair of Ethernet communications ports and a NMEA 2000 communications port. The Digital Radar Cable will be interfaced to one of the MFD's Ethernet communications ports, and the CAM220 will be interfaced to the MFD's other Ethernet communications port.

Q3. For the Auto Pilot -- the boat is a 12V system. Is there any other difference between the EV-150 and the EV-200?
A3. Both are capable of being used. The EV-200 is simply a heavier design.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] Electronics Upgrade - Joe Regal - 04-05-18, 05:56 AM
RE: [CA] Electronics Upgrade - Chuck - Raymarine - Moderator - 04-05-18 11:37 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)