Raymarine forum / Raymarine Forums / NAVAIDS v / [CA] e120 to RS130

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] e120 to RS130
04-05-18, 03:38 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] e120 to RS130
Welcome to the Raymarine Forum Prowler10M,

Please note that the Raystar 130 and Raystar 150 GPS Sensors are exclusively designed to support NMEA 2000 communications. Accordingly, it is not possible to interface these GPS sensors to directly to the NMEA 0183 lead/terminals of a NMEA 0183 listener in a manner which would permit these devices to communicate with one another. The Raystar 130 and Raystar 150 GPS Sensors should be interfaced to an E-Series Classic MFD in the manner stated within the FAQ found here.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] e120 to RS130 - Prowler10M - 04-05-18, 03:31 PM
RE: [CA] e120 to RS130 - Chuck - Raymarine - Moderator - 04-05-18 03:38 PM
RE: [CA] e120 to RS130 - Prowler10M - 04-05-18, 04:05 PM
RE: [CA] e120 to RS130 - Prowler10M - 04-06-18, 09:12 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication