The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Communications v / [DG] New VHF Channels, will i be able to upgrade my firmware on a Ray 240E?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] New VHF Channels, will i be able to upgrade my firmware on a Ray 240E?
04-13-18, 02:38 AM (This post was last modified: 04-13-18 12:11 PM by Chuck - Raymarine - Moderator.)
Post: #1
moki38 Offline
Junior Member
**
 		Posts: 13
Joined: Mar 2018
Reputation: 0
[DG] New VHF Channels, will i be able to upgrade my firmware on a Ray 240E?
As a proud owner of a Raymarine 240E, i came across this page: https://www.icomuk.co.uk/News_Article/3508/19370/

Long story short:
Changes to Channels 19, 20, 78, and 79 Marine VHF Usage
Due to the increased need for marine VHF channels for commercial use, a recent ITU World Radio Conference authorised and developed a new channel plan for the following VHF marine radio frequencies.

Channels 19, 20, 78, and 79, which were duplex have now been split into 8 simplex channels numbered 1019, 2019, 1020, 2020, 1078, 2078, 1079, and 2079. This new channel plan took effect January 1, 2017.

So, the question is:
Will i be able to upgrade (send to tech support, i guess) to this new VHF channel set, when the time comes?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG] New VHF Channels, will i be able to upgrade my firmware on a Ray 240E? - moki38 - 04-13-18 02:38 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication