[CA] Connecting to ev1, mfd, transponder

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Ahelbig,

Q1. How do I connect the following together: Axiom MFD and Quantum radar?
A1. Quantum radomes may be interfaced to Axiom MFDs via Wi-Fi or via an appropriate length of Digital Radar Cable. Quantum Radomes are available with and without a wired communications interface.

Q2. How do I connect the following together: Axiom MFD, EV-1 CCU, and digital yacht ait2000 ais transponder?
A2. These items will each be interfaced as individual spurs to a powered and properly terminated SeaTalkng / NMEA 2000 backbone. The backbone will need to feature at least four spur sockets to accommodate interfacing the MFD, EV-1 CCU, AIT2000, and SeaTalkng Power Cable as individual spurs to the SeaTalkng / NMEA 2000 backbone. The EV-1 CCU will be interfaced to the SeaTalkng backbone via an appropriate length of SeaTalkng Spur Cable. The MFD's Power/NMEA 2000 Cable and AIT2000's N2Net cable will each be interfaced to the SeaTalkng / NMEA 2000 Backbone via either an A06045 15.7in (0.4m) SeaTalkng Spur to DeviceNet (F) Adapter or an A06075 39.4in (1.0m) SeaTalkng Spur to DeviceNet (F) Adapter.