Raymarine forum / Raymarine Forums / Instruments v / Dual Depth finder. I'm Baack

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dual Depth finder. I'm Baack
04-13-18, 01:29 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Dual Depth finder. I'm Baack
Welcome back to the Raymarine Forum Daniel,

Q. If the PORT one failed, it would make sense to replace it in the same [censored]?
A. Yes. The transducer on the right side of the photo appears to be the speed/temp transducer supporting these functions for the Tridata instrument. The other transducer appears to be an E26030 D800/P17 Through-Hull Instrument Depth Transducer. Should the D800/P17 Through-Hull Instrument Depth Transducer, then it would be recommended that it be removed and replaced with the part number specified within this response ... if it will again be interfaced to an i60/ST60+/ST60/ST50+/ST50 Tridata display.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Dual Depth finder. I'm Baack - Chuck - Raymarine - Moderator - 04-13-18 01:29 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication