The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] DSC Support in Lighthouse 3.4

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] DSC Support in Lighthouse 3.4
04-15-18, 12:50 PM (This post was last modified: 04-17-18 04:17 PM by Chuck - Raymarine - Moderator.)
Post: #1
Claygr Offline
Junior Member
**
 		Posts: 7
Joined: Feb 2016
Reputation: 0
[CA] DSC Support in Lighthouse 3.4
I am trying to determine whether my Axiom MFD will display DSC position reports received through the StNG backbone. My Standard Horizon GX2200 is connected to a NMEA adaptor that transmits DSC information through the NMEA 2000 PGN 129808 sentence. I don't see 12908 listed on the chart of supported NMEA 2000 PGNs in the Lighthouse 3.4 Advanced Operating Instructions or any other PGN that looks to be DSC-related. However, I see in the Lighthouse Advanced Operating Instructions that there is an alarm for receipt of DSC distress messages. So, it appears that DSC information is received in some fashion. I did several searches in the forum and did not find any information on this topic. Any help would be appreciated. Thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] DSC Support in Lighthouse 3.4 - Claygr - 04-15-18 12:50 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication