Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] S100 Remote Control With EV-200
04-16-18, 10:26 AM (This post was last modified: 04-16-18 01:48 PM by Chuck - Raymarine - Moderator.)
Post: #12
RE: [CA] S100 Remote Control With EV-200
Tom,

As the S100's base station exclusively supports SeaTalk communications, it cannot be interfaced as a spur to a SeaTalkng backbone. Instead, a SeaTalk to SeaTalkng Converter Kit must be installed within the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone. The SeaTalk (yellow) socket of the SeaTalk to SeaTalkng Converter would then be connected to the D244 SeaTalk Junction Block, which in turn would be interfaced to the S100's base station.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] S100 Remote Control With EV-200 - Chuck - Raymarine - Moderator - 04-16-18 10:26 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)