[CA] No Navigation Data message

[DO335]

Hi Chuck,
I followed your directions to list each of the systems Raymarine SeaTalk/NMEA 2000 devices on the p70, the results are shown below and on the attached document. I also ran similar instructions on my Zeus2 MFD to see what the MFD lists as devices on the network. I believe what it shows is the p70 sees all of the Ramarine devices but not the Zeus2 MFD while the Zeus2 MFD sees all devices on network. If my
observation is correct is there a command or method to have the p70 discover the other devices on network?

Below is the Device lists from the p70 and Zeus2

Device List from p70 Auto Pilot Control Head Serial #
• Raymarine p70 Auto Pilot Control Head 0951354
• Seatalk1 to SEATALKng converter 0571781
• EV-2 Course Computer 0730660
• ACU400 Actuator Unit 1030223
• ST70 Instrument 0390044

Device List from B&G Zeus2 MFD Serial #
• E22105 ST70 Instument[1] 0390044
• E22158 SEATALKng Converter [25] 0571781
• E22166 p70 Pilot Control Head [28] 0951354
• E70097 EV2 Course Computer [54] 0730660
• E70100 ACU400 Pilot Computer [57] 1030223
• W12 MFD ZEUS2-MFD This Device
• W12 Navigator This Device
• W12 Pilot Controller This Device
• W12 iGPS This Device