The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] iTC-5 as an interface to ST1 Displays

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] iTC-5 as an interface to ST1 Displays
04-17-18, 09:57 PM (This post was last modified: 04-18-18 12:13 PM by Chuck - Raymarine - Moderator.)
Post: #1
Brian_Vogelaar Offline
Junior Member
**
 		Posts: 7
Joined: Jul 2017
Reputation: 0
[CA] iTC-5 as an interface to ST1 Displays
I want connect my speed, wind and depth transducers to an iTC-5 and then connect the iTC-5 to my ST1 network using the E22158 converter (see diagram). Will my design as depicted work or will I need an i70S added to the STNG network? Comments and suggested improvements are welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] iTC-5 as an interface to ST1 Displays - Brian_Vogelaar - 04-17-18 09:57 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication