Raymarine forum / Raymarine Forums / Instruments v / [CA] iTC-5 as an interface to ST1 Displays

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] iTC-5 as an interface to ST1 Displays
04-18-18, 12:16 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] iTC-5 as an interface to ST1 Displays
Welcome to the Raymarine Forum Brian,

Installation of an iTC-5 within a system additionally requires that an i70S Multifunction Instrument Display be installed within the SeaTalkng backbone. The iTC-5 will be used to calibrate the instrument transducers and to configure any alarms and/or offsets associated with the environmental data sensed by the transducers.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] iTC-5 as an interface to ST1 Displays - Chuck - Raymarine - Moderator - 04-18-18 12:16 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication