[CA] i70s will cannot switch off

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum RG,

Given the symptoms reported, is recommended that you verify that the bezel of the problematic i70S is not holding its power button press. This may be verified by removing the trim ring from the i70S and then testing it while the trim ring is removed. Should the problem persist when so tested, the it would be recommended that the problematic i70S be replaced by your Raymarine dealer if purchased within the last 30 days. If purchased more than 30 days ago, then the i70S should be sent to Raymarine’s Product Repair Center to be bench checked / serviced.