(DG) Connecting NMEA 0183 Version (1.5 to 2.3 ) to seatalking backbone

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

(DG) Connecting NMEA 0183 Version (1.5 to 2.3 ) to seatalking backbone

04-30-18, 11:01 AM

Post: #8

Derek - Raymarine - Moderator Offline

Administrator

Posts: 1,416
Joined: Nov 2017
Reputation: 9

RE: (DG) Connecting NMEA 0183 Version (1.5 to 2.3 ) to seatalking backbone

HI Art20c

Raymarine's recommendation is NOT to use the NMNEA GPS output from the AIS650, since this requires set up changes within the AIS650 and we recommend NOT to do this. ( I should not have mentioned it - apologies)

So we would really advocate using the SeaTalk to NMEA0183 converter block - since this was designed to do the job.

regards

« Next Oldest | Next Newest »

Messages In This Thread

(DG) Connecting NMEA 0183 Version (1.5 to 2.3 ) to seatalking backbone - Art20c - 04-27-18, 01:50 AM

RE: (DG) Connecting NMEA 0183 Version (1.5 to 2.3 ) to seatalking backbone - Derek - Raymarine - Moderator - 04-27-18, 03:59 AM

RE: (DG) Connecting NMEA 0183 Version (1.5 to 2.3 ) to seatalking backbone - Art20c - 04-27-18, 09:12 AM

RE: (DG) Connecting NMEA 0183 Version (1.5 to 2.3 ) to seatalking backbone - Derek - Raymarine - Moderator - 04-27-18, 11:04 AM

RE: (DG) Connecting NMEA 0183 Version (1.5 to 2.3 ) to seatalking backbone - Art20c - 04-27-18, 02:30 PM

RE: (DG) Connecting NMEA 0183 Version (1.5 to 2.3 ) to seatalking backbone - Derek - Raymarine - Moderator - 04-30-18, 08:26 AM

RE: (DG) Connecting NMEA 0183 Version (1.5 to 2.3 ) to seatalking backbone - Art20c - 04-30-18, 10:40 AM

RE: (DG) Connecting NMEA 0183 Version (1.5 to 2.3 ) to seatalking backbone - Derek - Raymarine - Moderator - 04-30-18 11:01 AM

User(s) browsing this thread: 2 Guest(s)