Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] RAY54 > RAY52 Replacement
05-01-18, 06:36 AM (This post was last modified: 05-01-18 07:57 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA] RAY54 > RAY52 Replacement
Q. As I understand your answer, If I choose to continue using my Raystar 125 for system GPS and want its GPS used by my new Ray52, and want Vessel information from my Ray52 sent to my C80 I would connect these wires:
Ray52 NMEA Cable Wires NMEA Cable from BUS Wires
Yellow GPS to Ray52 Yellow
Green GPS to Ray52 Brown
White Ray52 Vessels to MFD White
Brown Ray52 Vessels to MFD Green

Q. BUT if I choose to disconnect my Raystar 125 and use my new Ray52 for system GPS, I would connect the Ray52 wires to which NMEA cable wires?
Ray52 NMEA Cable Wires NMEA Cable from BUS Wires
White GPS to C80 ?
Brown GPS to C80 ?

NOT USED: Yellow, Green NOT USED: Yellow, Green, Blue, Grey, Mustard

Q. And do I need to configure anything in Ray52 or C80?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] RAY54 > RAY52 Replacement - jrmlsc - 03-12-18, 08:38 AM
RE: [CA] RAY54 > RAY52 Replacement - jrmlsc - 05-01-18 06:36 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)