Raymarine forum / Raymarine Forums / Autopilots v / (DG) Installation instructions for the SmartController

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Installation instructions for the SmartController
05-06-18, 03:23 PM (This post was last modified: 05-07-18 10:56 AM by Chuck - Raymarine - Moderator.)
Post: #5
TributeJ42 Offline
Junior Member
**
 		Posts: 24
Joined: Mar 2016
Reputation: 0
RE: (DG) Installation instructions for the SmartController
Derek, still confused by this.

First, I assume that that the D10 Pod is not necessary for my install. Please confirm.

The RF Base has a SeaTalk connection at one end and three wires at the base end (Red, Yellow and Black).

Looking at the SeaTalk to STng converter, I do not see a way to hook the RF Base to the converter. It would seem that I need a cable that replaces the one currently hooked up to the base that connects to the yellow port on the converter.

Can you further elaborate on how I hook up the RF base to the STng system?

Thanks,

Barry
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: (DG) Installation instructions for the SmartController - TributeJ42 - 05-06-18 03:23 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication