Raymarine forum / Raymarine Forums / AIS v / [CA] AIS 250 Install

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] AIS 250 Install
05-08-18, 09:58 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] AIS 250 Install
Welcome to the Raymarine Forum Chris,

Q1. I have the Yamaha Gateway connected via a Raymarine A06045 Cable. Is it possible to jump in on this connection from the Gateway going to the network or is there a better method to make the connection to the MFD?
A1. Please click here to view a FAQ addressing this subject. Per the referenced FAQ, the AIS receiver must be interfaced to the MFD NMEA 0183 port, not to the MFD's NMEA 2000 port. The MFD will ignore any NMEA 2000 PGNs containing AIS data. In contrast the MFD is designed to support processing of NMEA 2000 PGNs containing engine data and accordingly the MFD's NMEA 2000 communications interface will be interfaced to the powered and properly terminated SeaTalkng / NMEA 2000 backbone to which the engine gateway has been interfaced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] AIS 250 Install - solomon - 05-06-18, 05:53 PM
RE: [CA] AIS 250 Install - Chuck - Raymarine - Moderator - 05-08-18 09:58 AM
RE: [CA] AIS 250 Install - solomon - 05-09-18, 06:46 PM
RE: [CA] AIS 250 Install - solomon - 05-14-18, 01:47 PM
RE: [CA] AIS 250 Install - solomon - 05-18-18, 07:31 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication