[CA] Issues with Networked Axion 9 Units

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Wstandis,

It is recommended it that the software level within each MFD be verified, that the software be updated to v3.4.66 if not already at that version within each MFD, and that a Factory Reset (HOME->SETTINGS->THIS DISPLAY->FACTORY RESET) then be commanded to each MFD address this issue. Should the problem persist, then it would be recommended that the chart card be moved to the other MFD and that the Chart application then be tested within each MFD. Should the problem persist, then it would be recommended that the chart card be sent to Raymarine’s Product Repair Center to be bench checked / serviced.