Raymarine forum / Raymarine Forums / Autopilots v / [CA] No Navigation Data message

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] No Navigation Data message
05-08-18, 02:48 PM (This post was last modified: 05-08-18 03:04 PM by Chuck - Raymarine - Moderator.)
Post: #7
DO335 Offline
Junior Member
**
 		Posts: 5
Joined: May 2016
Reputation: 0
RE: [CA] No Navigation Data message
Sorry for the mistake, yes they are ST60s.
I didn't realize I had put the auto pilot system in track mode, that's not what I intended so that's probably the problem. I just looked at the manual (p70 and p70R Installation and operation instructions 81355-2-EN.pdf) for operation of the p70 and I don't see how to get it out of track mode and into auto mode (where I push auto button and boat stays on the current course until I push standby). Can you give me some guidance on how?
Thanks, Steve
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] No Navigation Data message - DO335 - 03-29-18, 04:39 PM
RE: [CA] No Navigation Data message - DO335 - 05-08-18 02:48 PM

Forum Jump:


User(s) browsing this thread: 5 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication