The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] EV-1 devicenet connection

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] EV-1 devicenet connection
05-09-18, 09:08 AM (This post was last modified: 05-10-18 10:35 AM by Chuck - Raymarine - Moderator.)
Post: #1
Range Rover Offline
Junior Member
**
 		Posts: 2
Joined: May 2018
Reputation: 0
[CA] EV-1 devicenet connection
Installing my EV1, and see there is 2 connection points on the Ev-1 sensor. 1 SeaTalkng, and 1 Devicenet (standard N2K). My backbone and all spurs are done in the Maretron cabling, and I'd like to minimize the number of conversions from STng to Devicenet plugs.

Can I use the Devicenet port, instead of the STng port, on the EV-1 to connect to the backbone?

Hans Christian 33
Raymarine A98
EV200 Autopilot w Type 1 ram(installing now)
HD18" Radar (future)
i70s displays (future)
Maretron WSO100 wind sensor
Maretron NMEA2k network cabling
Icom 506 VHF w AIS
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] EV-1 devicenet connection - Range Rover - 05-09-18 09:08 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication