The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] MFD and C-Map Charts

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] MFD and C-Map Charts
05-10-18, 03:26 PM (This post was last modified: 05-14-18 01:17 PM by Chuck - Raymarine - Moderator.)
Post: #1
Re Volt Offline
Junior Member
**
 		Posts: 3
Joined: Feb 2017
Reputation: 0
[CA] MFD and C-Map Charts
I powered up my electronics, consisting or an a97, a95, Stg converter and a Quantum radar. When powering up the system the displays would lock up not responding to touch of even shutting down. I unplugged the a95, then the a97 (also the data master) behaving normally. What I eventually found was that when I removed the CMAP 4D MAX+ WIDE - SD/MSD from the a95 everything went back to normal. My question is since the chart is a 2017 version, is that the reason, or is the chart cartridge itself some how corrupted or compromised and causing the problem?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA] MFD and C-Map Charts - Re Volt - 05-10-18 03:26 PM
RE: [CA] MFD and C-Map Charts - AJS - 05-14-18, 08:54 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication