[CA] E-80 MFD Time issues

[Chuck - Raymarine - Moderator]

Charles,

Per our phone conversation,
- you will need to disconnect the MFD from the SeaTalk bus ... simply unplug its SeaTalk/Alarm Cable
- you will need to connect the MFD's SeaTalk/NMEA 2000 port to the SeaTalkng/NMEA 2000 backbone via the A06061 Cable
- you will need to power the SeaTalkng/NMEA 2000 backbone using the supplied SeaTalkng Power Cable (red w/black stripe)
- you will need to disconnect the red lead(s) of the SeaTalk cables which are presently connected to the red SeaTalk terminal(s) of the autopilot course computer.

Reference Materials:
SeaTalkng Reference Manual: https://raymarine.app.box.com/s/2ulwt6ye...3388950831
SeaTalkng Networking Components web page (also within the aforementioned SeaTalkng Reference Manual): http://www.raymarine.com/view/?id=5536
SeaTalkng Sample System Diagram: http://www.raymarine.com/view/?id=400