Raymarine forum / Raymarine Forums / Autopilots v / (DG) Installation instructions for the SmartController

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Installation instructions for the SmartController
05-12-18, 02:37 PM (This post was last modified: 05-14-18 10:56 AM by Chuck - Raymarine - Moderator.)
Post: #7
TributeJ42 Offline
Junior Member
**
 		Posts: 24
Joined: Mar 2016
Reputation: 0
RE: (DG) Installation instructions for the SmartController
Derek, looking at the Seatalk to STng converter kit, the spur cable has a yellow ng connector on one end and a Seatalk connector on the other. Am I supposed to cut the Seatalk end off exposing the red, yellow and black wires you mention or is there another cable I need to purchase that has the wires?

Thanks,

Barry
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: (DG) Installation instructions for the SmartController - TributeJ42 - 05-12-18 02:37 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication