The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [DG11] Sonarchart Live, depth offset

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] Sonarchart Live, depth offset
05-16-18, 05:42 AM (This post was last modified: 05-17-18 08:32 AM by Chuck - Raymarine - Moderator.)
Post: #1
moki38 Offline
Junior Member
**
 		Posts: 13
Joined: Mar 2018
Reputation: 0
[DG11] Sonarchart Live, depth offset
Hi,

When using the SonarChart live (Axiom7,RV-200), the depth offset doesn't work as i would like it to do.
The Depth on my DST800/i70s is calibrated to "below keel", offset of 1.7m.
This shows as my current depth, in 2.0m water as 0.3m.

When using SonartChart live, this will show up as "deep red", as it thinks the depth is 0.3m, when i really is 2.0m

The workaround is the to set the offset to 0, so the SonarChart live, shows a "normal" depth. Ofcourse, the depthtransducer is really 0.2m below the waterline, but i am unable to set the offset to -0.2m

The real problem, is that this new depth offset setting (of 0.0), is confusing the Admiral. So either i have a working SonarChart Live or a very confused Admiral.

How to fix this? (Getting a new Admiral is not really option)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] Sonarchart Live, depth offset - moki38 - 05-16-18 05:42 AM

Forum Jump:


User(s) browsing this thread: 9 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication