Raymarine forum / Raymarine Forums / Fishfinders v / [CA11] Axiom 12 MFD and an RV-220 Issue

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Axiom 12 MFD and an RV-220 Issue
05-18-18, 03:51 PM (This post was last modified: 05-18-18 03:54 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom 12 MFD and an RV-220 Issue
Welcome to the Raymarine Forum Jerry,

Indeed it is necessary to install both the port and starboard RealVision split pair transducers when considering installation of the RV-212 or RV-220. Per the information found on page 13 of the REALVISIONâ„¢ RV-2xx 3D Bronze Transducer Installation instructions, "Your installation should comprise either a single RV-200 transducer, or a split-pair of RV-212(P/S) or RV-220(P/S) transducers." Raymarine posts its Product Documentation on its website to permit customers to review the installation and operation documentation prior to making any product purchases.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom 12 MFD and an RV-220 Issue - Chuck - Raymarine - Moderator - 05-18-18 03:51 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication