The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / (DG11) Intermittent depth

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG11) Intermittent depth
05-19-18, 04:54 PM (This post was last modified: 05-21-18 09:19 AM by Derek - Raymarine - Moderator.)
Post: #1
beneteau472 Offline
Junior Member
**
 		Posts: 2
Joined: May 2016
Reputation: 0
(DG11) Intermittent depth
I have a Raymarine suite of products from around 2005 on my sailboat. Recently the depth is intermittently not working. The trial data instrument has visible moisture inside the display and I suspect is causing the problem.

I have reseated all connectors with no change.

I think at this point, the tridata instrument is likely the culprit. In that case, what are my options? I would like to keep the system as intact as possible replacing as few things as necessary. I do not need a tridata instrument display as depth is shown on the MFD and other instruments.

Can I replace my transducer with a NMEA 2000 airmar depth and interface that into my current seatalk network?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
(DG11) Intermittent depth - beneteau472 - 05-19-18 04:54 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication