The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA11] autohelm with p-70 head not accepting garmin gwind nmea 2000 data

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] autohelm with p-70 head not accepting garmin gwind nmea 2000 data
05-23-18, 09:22 PM (This post was last modified: 05-24-18 11:12 AM by Chuck - Raymarine - Moderator.)
Post: #1
relentless Offline
Junior Member
**
 		Posts: 15
Joined: Apr 2018
Reputation: 0
[CA11] autohelm with p-70 head not accepting garmin gwind nmea 2000 data
hello I have the evo wheel unit with the P-70 control head, the head is picking up all nmea 2000 sources EXCEPT my new garmin wired Gwind unit, unit operates normally with my garmin gpsmap720 under track mode and my 3 garmin gmi 20 4" heads up display units, but when wind vane is selected p70 states "Source selection not possible, Consult manual for more information" i cannot find anything in the manual, please advise on how to correct this issue

please note all garmin software/firmware is up to date

best regards
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] autohelm with p-70 head not accepting garmin gwind nmea 2000 data - relentless - 05-23-18 09:22 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication