Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] NMEA 2000 and Axiom 9

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] NMEA 2000 and Axiom 9
05-24-18, 06:29 AM (This post was last modified: 05-24-18 08:22 AM by Chuck - Raymarine - Moderator.)
Post: #4
will40 Offline
Junior Member
**
 		Posts: 18
Joined: Mar 2018
Reputation: 0
RE: [CA11] NMEA 2000 and Axiom 9
Chuck

I have revised my sketch and removed the Ancor NMEA backbone and the ST60 Graphic and I have added an i70s. Please take a look at the attached and let me know if I am on the right track? The SeaTalkng backbone is all located at the helm

Thanks for all your help

Bill
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] NMEA 2000 and Axiom 9 - will40 - 05-22-18, 05:04 PM
RE: [CA11] NMEA 2000 and Axiom 9 - will40 - 05-24-18 06:29 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication