[CA11] Raymarine upgrade

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Victor,

With respect to interfacing the Quantum 2 Radome to the Axiom Pro S MFD, the currently installed Ethernet cables (i.e. Digital Radar Cable & SeaTalkhs cables) may be left in place. The SeaTalkhs cable would simply be unplugged from the E120W's SeaTalkhs Socket and then adapted (A80160) to be mated to one of the Axiom Pro MFD's two Ethernet Network sockets. The currently installed Digital Radar Cable may be adapted (A80308) to be mated to the Quantum 2 radome as well. Assuming that the 2x ST70 instrument, SPX30 autopilot with p70 control head, and AIS650 had all been interfaced to the E120W via a powered and properly terminated SeaTalkng / NMEA 2000 backbone, then it would simply be necessary to replace the SeaTalkng Spur Cable presently used to interface the E120W to the backbone with an A06075 39.4in (1.0m) DeviceNet (F) to SeaTalkng Spur Adapter.