Raymarine forum / Raymarine Forums / Instruments v / [CA11] Time reverts to UTC on i70 after Lighthouse 3 upgrade

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Time reverts to UTC on i70 after Lighthouse 3 upgrade
05-25-18, 01:45 PM (This post was last modified: 05-29-18 09:21 AM by Chuck - Raymarine - Moderator.)
Post: #7
[email protected] Offline
Junior Member
**
 		Posts: 21
Joined: Mar 2018
Reputation: 0
RE: [CA11] Time reverts to UTC on i70 after Lighthouse 3 upgrade
I haven’t got anything that could potentially be a data source powered up. Only the es98, SPX and i70s are on. I will try and look at data sources on the MFD but I normally get an error that it can’t configure data sources because the SPX is on the network. I’ll pulled the fuse on the SPX then I could see data sources. The es98 is using itself for data and time, nothing else is available. The i70 has a choice of Auto or Internal GPS, I changed from Auto to Internal GPS and the issue remains.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Time reverts to UTC on i70 after Lighthouse 3 upgrade - [email protected] - 05-25-18 01:45 PM

Forum Jump:


User(s) browsing this thread: 14 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication