Raymarine forum / Raymarine Forums / AIS v / [CA11] Adding AIS to an old system

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Adding AIS to an old system
05-29-18, 01:48 PM (This post was last modified: 05-29-18 01:48 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Adding AIS to an old system
Welcome to the Raymarine Forum Mattias,

Q1) Can the C120 or E120 interface with, for example, the new AIS700?
A1. Yes. The MFD's NMEA 0183 Cable will be interfaced to the 38400 BAUD leads of the AIS700.

Q2) Can the C120 or E120 interface with the old Seatalk system, e.g. run the auto pilot that requires bidirectional data transfers, not only reading?
A2) Quite possibly. However, it would be necessary for you to identify the makes/models of each of the devices which are currently interfaced to the display which will be replaced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Adding AIS to an old system - Chuck - Raymarine - Moderator - 05-29-18 01:48 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication