The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / Raypilot 650 Control Head

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Raypilot 650 Control Head
05-29-18, 06:42 PM
Post: #1
mbjezior Offline
Junior Member
**
 		Posts: 5
Joined: Feb 2018
Reputation: 0
Raypilot 650 Control Head
Installed a Vulcan 7FS plotter....have a Raypilot 650 control head (seatalk) connected to a Yacht Devices seatalk-0183 converter, then to an Actisense NGW-1 0183 to 2000 converter....goes into network and plotter...plotter “sees” the rudder deflection, but will not discover the autopilot. Any suggestions? If it won’t work...any recommendations on a new control head and converter cables needed? Is it that simple...or would I need to replace everything except for the hydraulic drive?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Raypilot 650 Control Head - mbjezior - 05-29-18 06:42 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication