[CA] [CA11] C70 to Axiom 9 Upgrade

[Chuck - Raymarine - Moderator]

Brad,

Q1. Transducer plug to DSM 30 appears to be a different plug. How do I adapt it to the Axiom 9?
A1. An Axiom 9 RV MFD's transducer socket may be adapted to permit it to be mated to a transducer which had been directly mated to a DSM30 or DSM300. The part number for this adapter cable is A80489. Please click here to view a FAQ addressing where one may purchase parts for Raymarine products.

Q2. GPS seems to take about 5 min to acquire its fix. Is this normal?
A2. This would not be normal for a MFD has been installed in a location affording it an unobstructed view of the skies overhead. Please click here to view a FAQ addressing this subject. Should the MFD be so located and the MFD require 5 minutes to acquire a GPS position FIX between power on/off/on cycles, then it would be recommended that the MFD be exchanged by the dealer (if purchased within the last 30 days or sent to Raymarine’s Product Repair Center to be bench checked / serviced (if purchased more than 30 days ago).