[DG11] Sonarchart Live, depth offset

[Derek - Raymarine - Moderator]

Hi moki38

The internal sonar using the Sonar transducer is entirely independant of the transducer used with the depth instrument.

The settings used for the depth transducer are not used by the sonar

The depth measured by the Depth transducer, shared by the AXIOM in the STng databox is a repeated display only and does not have any influence on the sonar depth measured directly by the AXIOM.

The AXIOM can therefore display two different depths, one a repeat from the data from STng and the other derived from its own Sonar transducer.

The Sonar transducer can have an offset entered, but this does not get used when using SONARCHART live for the reasons advised before.

Thanks