Evolution EV-100 Wheel pilot system
|
04-29-16, 11:04 AM
Post: #14
|
|||
|
|||
RE: Evolution EV-100 Wheel pilot system
Q1: So just so I understand, the spur cable running from the 5 way in combination with the 3 foot spur going between the P70 and the e7 MFD needs to stay below 15 feet total?
A1: Negative. The spur cable running from the 5 way in combination with the 3 foot spur going between the P70 and the e7 MFD needs to stay below 5m (16.4ft). Q2. And as far as circuit breakers go, all I will have to add is one for the ACU? A2. It is recommended that the ACU be powered by a dedicated circuit. Please click here to view a FAQ addressing this subject. Q3. Please take a gander at this final diagram one last time to verify I am golden for the project.. A3. The diagram appears correct. Q4. One last question, i have never heard of a 9 axis system, is there a list of all of these ? A4. Negative. From the standpoint of user accessible data, the 9 axis gyro will permit heading, heal angle (Tilt), and rate of turn data. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)