The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Upgrading from an E80 to Axiom 12
06-01-18, 02:25 PM (This post was last modified: 06-01-18 03:50 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Upgrading from an E80 to Axiom 12
I have an E80 mounted on my sailboat's binnacle plus A/P ST6000+ and ST 60 depth, wind and speed instruments of that era connected to the E80 via seatalk.

I am going upgrade to an Axiom 12 (plus a radar) but I want to keep all the old instruments and A/P. It seems to me all I need is a single converter that converts the sea talk to Raymarine's version of nmea2000 and its output feeds the chart plotter. If that is so, what converter do I use? Where in the sea talk chain should I install the converter?

I plan on using the same A/P head that I have now..

Also, I am not sure wether to add a Sirius weather capability. I might want it later on. Is there anything I should add now that will make it easier to add Sirius later?

Thanks for your help.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Upgrading from an E80 to Axiom 12 - carlmk - 06-01-18 02:25 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)