[CA] [CA11] no image on downscan on the pro7

[llaserdoc]

Chuck, I went to my boat storage and I found the problem. The person who puts the boats on the rack knocked the transducer off 2 times and tried to reinstall it. The transducer was cracked. I have ordered a new transducer and will install it soon.

To avoid this happening again would you move the transducer straight up about 2 or 3 inches ? In the picture you can see it is under the hull of the boat with the current mount. Does the transducer need to be positioned at the bottom of the hull or can it be raised up to avoid being hit again