Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] upgrading from e210 classics to axiom pro -- ac20 autopilot?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] upgrading from e210 classics to axiom pro -- ac20 autopilot?
06-04-18, 09:15 AM (This post was last modified: 06-04-18 09:49 AM by Chuck - Raymarine - Moderator.)
Post: #3
dkwhit Offline
Junior Member
**
 		Posts: 3
Joined: May 2018
Reputation: 0
RE: [CA11] upgrading from e210 classics to axiom pro -- ac20 autopilot?
- my old system uses an M260 connected through a DSM300. My understanding is that I'll need to replace the dsm300 with a cp370 in order to keep using the m260. Is that correct? If so, then I would connect the cp370 to the HS switch with the same adapter cable you mentioned before?
- To add a Quantum 2 radome, also connect to HS switch through the same adapter cable?
- Looking at a link you'd posted on another thread, I didn't see an adapter plate to fit Axiom Pro into dash where E120 now sits. That suggests I'll need to make something myself, or am I overlooking an option?

Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication