[CA] [CA11] upgrading from e210 classics to axiom pro -- ac20 autopilot?

[Chuck - Raymarine - Moderator]

Dave,

Q1. My old system uses an M260 connected through a DSM300. My understanding is that I'll need to replace the dsm300 with a cp370 in order to keep using the m260. Is that correct? If so, then I would connect the cp370 to the HS switch with the same adapter cable you mentioned before?
A1. Correct & correct.

Q2. To add a Quantum 2 radome, also connect to HS switch through the same adapter cable?
A2. I recommend installing an Digital Radar Cable for to Quantum 2 radome to support communications and supplying the radome with power. The Digital Radar Cable will be adapted to be mated to the SeaTalkhs Network Switch via an A80513 RayNet (M) to RJ45 (M) Adapter.

Q3. Looking at a link you'd posted on another thread, I didn't see an adapter plate to fit Axiom Pro into dash where E120 now sits. That suggests I'll need to make something myself, or am I overlooking an option?
A3. Raymarine recently introduced the A80565 C120/E120 Classic MFD to Axiom Pro 12 Adapter Plate. Raymarine's webmaster will be notified to add this an other missing adapter plates to the Adapter Plates tab of the Axiomâ„¢ & Axiomâ„¢ Pro Accessories web page.