[CA] [CA11] Upgrading from an E80 to Axiom 12
|
06-04-18, 03:31 PM
(This post was last modified: 06-04-18 04:19 PM by Chuck - Raymarine - Moderator.)
Post: #5
|
|||
|
|||
RE: [CA11] Upgrading from an E80 to Axiom 12
I am going to have two Axiom Pros, one at the binnacle and one down below plus a Quantum 2 Doppler radar. I think the Axiom Pros have two Raynet Ports. Is the Radar connected to the binnacle Axiom by a Raynet cable and then that Axiom connected to the Axiom down below by a second RayNet cable? Is the HS5 Raynet Network switch to provide me with one more connection such as for the Sirius radio?
Is it better to convert my ST 60 transducers to NMEA2000 with an ITC5 Converter or to convert the SeaTalk data to NMEA 200 by a converter? Is there a diagram available? Thanks again for your help. I am slowly getting there. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Upgrading from an E80 to Axiom 12 - carlmk - 06-01-18, 02:25 PM
RE: [CA11] Upgrading from an E80 to Axiom 12 - Chuck - Raymarine - Moderator - 06-01-18, 03:51 PM
RE: [CA11] Upgrading from an E80 to Axiom 12 - carlmk - 06-04-18, 07:47 AM
RE: [CA11] Upgrading from an E80 to Axiom 12 - Chuck - Raymarine - Moderator - 06-04-18, 09:44 AM
RE: [CA11] Upgrading from an E80 to Axiom 12 - carlmk - 06-04-18 03:31 PM
RE: [CA11] Upgrading from an E80 to Axiom 12 - Chuck - Raymarine - Moderator - 06-05-18, 08:26 AM
RE: [CA11] Upgrading from an E80 to Axiom 12 - carlmk - 06-05-18, 08:32 AM
RE: [CA11] Upgrading from an E80 to Axiom 12 - Chuck - Raymarine - Moderator - 06-05-18, 09:03 AM
|
User(s) browsing this thread: 1 Guest(s)