Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] Using proAIS2 with AIS500 transceiver

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Using proAIS2 with AIS500 transceiver
06-04-18, 08:29 PM
Post: #3
dantos Offline
Junior Member
**
 		Posts: 9
Joined: Apr 2018
Reputation: 0
RE: [CA11] Using proAIS2 with AIS500 transceiver
Thank you Chuck - that makes perfect sense. I just found online and reviewed an installation guide on the AIS500 and see a diagram of the RS 232 male connection.

I already have a USB to RS 232 cable from Keyspan, and am wondering if there is anything special about the Sealevel unit that you recommend strongly. It would seem to me that we are referring about a commodity item, and I'll probably only use it once on the AIS unit. Am I missing anything?

Respectfully,

David
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Using proAIS2 with AIS500 transceiver - dantos - 06-04-18 08:29 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication