Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] Low, Medium or High CHIRP using Axiom Pro and RV-100 Transducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Low, Medium or High CHIRP using Axiom Pro and RV-100 Transducer
06-05-18, 03:08 PM (This post was last modified: 06-05-18 03:11 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Low, Medium or High CHIRP using Axiom Pro and RV-100 Transducer
Welcome to the Raymarine Forum bsikkel,

Axiom Pro RVX MFDs feature two transducer sockets, one for RealVision Transducers and the second for compatible 1kW CHIRP Transducers or compatible 50kHz/200kHz TransducersWhile it is true that the Axiom Pro 12 RVX can support displaying sonar imaging from low, medium, or high CHIRP sonar transducer, the RV-100 only supports High CHIRP (Sonar), RealVision 3D, SideVision, and DownVision Sonar imaging. Should the Axiom Pro RVX's 1kW Transducer socket be interfaced to either one or a pair of compatible 1kW CHIRP Transducers, then the MFD will be capable of additionally displaying CHIRP sonar imaging associated with the 1kW CHIRP Transducer(s).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Low, Medium or High CHIRP using Axiom Pro and RV-100 Transducer - Chuck - Raymarine - Moderator - 06-05-18 03:08 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication