Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Creating distance and bearing vector on Axiom
06-12-18, 09:43 AM
Post: #2
RE: [CA11] Creating distance and bearing vector on Axiom
Welcome to the Raymarine Forum Bill,

Like the hsb/hsb2/SL Pathfinder Series Radar Displays which preceded Axiom MFDs, the LightHouse 3 software also supports an VRM/EBL feature within the Radar application. Details of the VRM/EBL feature may be found within Chapter 11.6: Range and bearing of the LightHouse 3.4 Advanced Operation Instructions. Within the Chart application of LightHouse 3, range and bearing from the vessel's location to a cursor position may be determined by holding one's finger pressed to the screen in the desired location. Doing so will cause the Chart context menu to appear. This menu lists the coordinates as well as the range and bearing to the associated location. More information on this subject may be found within Chapter 8.1: Chart app overview of the LightHouse 3.4 Advanced Operation Instructions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Creating distance and bearing vector on Axiom - Chuck - Raymarine - Moderator - 06-12-18 09:43 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)