Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] Using proAIS2 with AIS500 transceiver

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Using proAIS2 with AIS500 transceiver
06-18-18, 09:59 AM (This post was last modified: 06-18-18 10:02 AM by Chuck - Raymarine - Moderator.)
Post: #10
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Using proAIS2 with AIS500 transceiver
David,

Our Repair Center recommended staying with the ProAIS rather than the ProAIS2 application for this purpose. If not previously stated, the AIS500's 38400 BAUD port should not be simultaneously connected to an operating Raymarine system when using the AIS500's DB9 Serial Plug. Should disconnecting the AIS500 from the other system components not then permit the ProAIS software from then communicating with AIS500, then it would be recommended that the AIS500 be brought to a Raymarine installer or sent to Raymarine's Repair Center to have its static data updated.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Using proAIS2 with AIS500 transceiver - Chuck - Raymarine - Moderator - 06-18-18 09:59 AM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication