Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] Using proAIS2 with AIS500 transceiver

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Using proAIS2 with AIS500 transceiver
06-18-18, 09:26 PM
Post: #11
dantos Offline
Junior Member
**
 		Posts: 9
Joined: Apr 2018
Reputation: 0
RE: [CA11] Using proAIS2 with AIS500 transceiver
Chuck,

When I was on the boat yesterday, I made sure that none of the Raymarine units were powered on. Then I connected my laptop to the AIS500 unit with my USB to RS232 cable.

Do I also need to make sure that the AIS unit is NOT connected to any other Raymarine units, even if they are powered off? I just want to be clear about your last post.

Thank you,

David
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Using proAIS2 with AIS500 transceiver - dantos - 06-18-18 09:26 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication