The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom 9 to Seatalkng

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9 to Seatalkng
06-20-18, 11:09 AM (This post was last modified: 06-21-18 03:44 PM by Chuck - Raymarine - Moderator.)
Post: #1
S Guttilla Offline
Junior Member
**
 		Posts: 7
Joined: Jun 2018
Reputation: 0
[CA11] Axiom 9 to Seatalkng
I'm installing a Seatalkng starter kit for my network. Just received the starter kit and it has a power cable and a stub cable. The stub cable has white ends with a female connector at both ends. The cable coming from the Axiom 9 comes out of the same connector as the power cord. Do I need an interface cable between the Hub and this cable coming out of the Axiom 9 as I believe the cable coming out o the Axiom 9 is also a female terminated cable (not sure as I am not at the boat as I write this) or should I be connecting the white stub cable to another port on the Axiom 9?

Thanks for your Help.

Sal Guttilla
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom 9 to Seatalkng - S Guttilla - 06-20-18 11:09 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication