The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Is it possible to interface NMEA and Seatalk between C80 and C120W

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Is it possible to interface NMEA and Seatalk between C80 and C120W
06-21-18, 09:21 AM (This post was last modified: 06-27-18 03:49 PM by Chuck - Raymarine - Moderator.)
Post: #1
andyschoenb Offline
Junior Member
**
 		Posts: 14
Joined: Apr 2018
Reputation: 0
[CA11] Is it possible to interface NMEA and Seatalk between C80 and C120W
Hello
I have a older classic C80 at the helm that is interfaced with radar, autohelm, and suite of ST60+ instruments.
I had a E120 at the Nav station that had the illumination fail. I have an opportunity to purchase a C120W and I was wondering if I can interface through NMEA and SeaTalk the C80 Classic and the C120W.
I am not interested in having the C120W access the radar signal.
I also have a Standard Horizon GX2200 AIS receiver that will not interface with the C80 at the helm (I have tried all options - NMEA connection at 38400 Baud without success), and would like the AIS signal at least on the Nav station C120W.
Please let me know if what I am proposing is possible
Thank you
Andy
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Is it possible to interface NMEA and Seatalk between C80 and C120W - andyschoenb - 06-21-18 09:21 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication