[CA11] Adding A50 chartplotter to Evolution Pilot

Thread Rating:

1 Vote(s) - 3 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Adding A50 chartplotter to Evolution Pilot

06-22-18, 02:36 PM (This post was last modified: 06-22-18 03:33 PM by Chuck - Raymarine - Moderator.)

Post: #3

Eugene323 Offline

Junior Member

Posts: 5
Joined: Dec 2017
Reputation: 0

RE: [CA11] Adding A50 chartplotter to Evolution Pilot

Thank you.

Yes- I believe if I attach an extension backbone cable where the backbone terminates at the fluxgate I'll be able to use the extra tee I already have to join the extended backbone to the spur cable I have to the plotter. I'll use the termination at the tee and be done. How important is it that I attach the ferrite to the p70s? The autopilot works very well now without it and I see no other issues?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Adding A50 chartplotter to Evolution Pilot - Eugene323 - 06-18-18, 02:59 PM

RE: [CA11] Adding A50 chartplotter to Evolution Pilot - Chuck - Raymarine - Moderator - 06-21-18, 08:09 AM

RE: [CA11] Adding A50 chartplotter to Evolution Pilot - Eugene323 - 06-22-18 02:36 PM

RE: [CA11] Adding A50 chartplotter to Evolution Pilot - Chuck - Raymarine - Moderator - 06-22-18, 03:45 PM

RE: [CA11] Adding A50 chartplotter to Evolution Pilot - Eugene323 - 06-22-18, 04:43 PM

RE: [CA11] Adding A50 chartplotter to Evolution Pilot - Chuck - Raymarine - Moderator - 06-25-18, 08:43 AM

User(s) browsing this thread: 1 Guest(s)